VLT(Visible Light Transmission):35%. IR Rej(Infrared Rejection):90%.
UV Rej(Ultraviolet Rejection):90%. Type: One-way see-through, high heat insulation, high sun protection. Due to the instability of the product transportation process, the product may be damaged.It can block most of the ultraviolet rays and insulate heat, provide you with a comfortable space, and help reduce cooling costs in summer. The one-way mirror window film has a highly reflective silver surface, which provides excellent daytime privacy. The quality of its one-way mirror largely depends on the lighting conditions, and only when daylight makes the outside brighter than the inside, it can provide the expected privacy during the day. If you have lights in your home, the internal brightness will be higher than the external brightness, so the mirroring effect will be reversed at night. The one way window film provides great intended privacy ONLY during daytime.
The side with brighter light would show a mirror-like appearance. So the mirror-effect would be reversed at night since the inside will be brighter than the outside, which means people would be able to SEE THROUGH the window. Remember to draw a curtain during night. The window reflective film effectively blocks out UV rays by adding UV solvents to the bottom.
Furthermore, the glass privacy film can protects skin from damage and reduce the fading & aging of interior furnishings. Perfectly provide you a comfortable environment. Easy to remove the backing:Use 2 pieces of tape to apply to both sides of the corners and pull. Spray a lot of water to the window and film when you install. To strengthen the glass, reduce the damage caused by splashing glass fragments.
How To Install a Perfect Windom Film? Make your windows or glass doors extremely clean, make sure there's no glue residue or dust, especially corners.
Measure the exact dimensions of your window and cut the film into the right size Step 3. Remove protective liner of the film, spray enough soapy water onto the surface of the glass and the film, then place the film against glass. Squeegee out all bubbles from the center to all the four edges.
Make sure there is no visible bubble left on the surface. Trim away the redundant film edges (leaving a gap of 1/16 inches between the film and window frame). Then wipe the window clean. (2)Due to the difference between different monitors, the pictures may not reflect the actual color of the item. (3)Compare the detail sizes with yours, please allow 1-3cm error, due to manual measurement. This item is in the category "Home & Garden\Window Treatments & Hardware\Window Film". The seller is "heatinsulation" and is located in this country: US. This item can be shipped to United States.